成都瑞戈减震器拉力试验机

成都瑞戈公司从事以电液伺服为驱动的机械性能试验设备的研发、设计和制造，产品广泛应用于汽车、航空等领域的零部件试验，积累了大量的机械性能试验设备设计、制造和应用的经验，涉及的产品如汽车底盘零部件、悬架零部件、橡胶产品等的疲劳试验、耐久性试验、寿命试验等非标定制的试验设备。

主要数据Main technical data:

1.  Static loading capacity: 30kN, dynamic loading capacity: +/- 30kN, accuracy> +/- 1%

2.  Lateral force +/- 0.5Kn(adjustable) static accuracy +/- 1%

3.  AFG(Function Generator) can be sine wave, triangular wave, oblique wave, superposition of waves, and be input wave

4.  Displacement control, loading capacity control, one backup control(like friction control or deformation control), displacement and    

     loading capacity control can be switch to each other during test

5.  Frequency scope: 0.01-35Hz

6.  Counter capacity: 99,999,999 times, with preset and zero clearing function, and counting automatic, stop test automatic when

     reach preset times

7.  Actuator stroke: +/- 90mm adjustable, accuracy better than 1%FS

8.  Test space scope: 1000mm

9.  Can be tested static friction, test speed less than 0.005m/s, accuracy +/-1%

10.Shock absorber max vibration speed: 0.1m/s-4.6m/s

11.Lateral scope: 0.1kN-1.5kN, enforce pressure to 1, 2, 4 shock absorber, show valve by loadcell

The two columns are hardened and the surface hard chromium increases hardness, abrasion resistance and corrosion resistance.Column spacing 550mm. 

Electric double screw elevator lifting beam, manual lock bar, test space adjustment is convenient, fast and reliable.

 Equipment conditions

Power supply: 380V AC 50Hz 2KW

Power off: 16A

Power supply wiring requirements: 3*4+2*2.5

Ambient temperature: 5 ~ 35 ℃

Atmospheric pressure: 86 ~ 106Kpa

Environmental conditions: no strong vibration, no strong magnetic field interference, no high concentration of dust and corrosive substances, no direct sunlight or other direct radiation of other heat sources.Should be placed in a well-ventilated laboratory, the test bench is fixed with the iron expansion screw, with sufficient space for operation and maintenance.

服务热线：O28-85754602

官网网址：http://www.rig-test.com/

公司地址：四川省成都市双流县九江高新产业园A区